LMR®- LLPL is an indoor highly fire retardant cable intended specifically for runs within return air handling plenums (e.g. dropped ceilings, raised floors). It has a UL/NEC & CSA rating of 'CMP' and 'FT6' respectively.
Coaxial Cable Attenuation
& Power Handling Calculator

LMR®-600-LLPX: View Data Sheet

Part Number LMR®-600-LLPX
Application Indoor/Outdoor Plenum CMP/FT-6
Jacket FP
Jacket Color Red
Cable Od (in) 0.600
Cable Od (mm) 0.575
Weight lb/ft 0.24
Weight kg/m 0.36
Operating Temp (F) -40/+257
Operating Temp (C) -40/+125
Bending Moment ft/lb 2.75
Bending moment n-m 3.730
Impedance (Ohm) 50
Stock Check

Check stock online now:

Stock Check


For more Times Microwave Systems videos, visit our Videos page.

LMR Overview
LMR Overview

Installation Tools

The following Hardware and Installation tools are compatible with LMR®-600-LLPX

Crimp Tool

Part Number: CT-U

Stock Code: 3192-181

Crimp Handle (Dies Required)

Crimp Rings

Part Number: CR-600

Stock Code: 3190-831

Crimp Rings for TC/EZ-600 connectors (pkg of 10)

Tool Kit

Part Number: TK-600EZ

Stock Code: 3190-1602

"Tool kit for crimp/clamp connectors (includes CCT-02, CST-600, CT-600, Tool Pouch)"

Strip Tool

Part Number: CST-600

Stock Code: 3192-052

Combination prep tool for LMR-600 crimp and clamp style connectors

Crimp Dies

Part Number: Y1720

Stock Code: 3190-203

".610"" Hex Dies"

Hanger Blocks

Part Number: CB-600T

Stock Code: CB-600T

Dual Cable Support Block (kit of 10)

Ground Kit

Part Number: GK-S600TT

Stock Code: GK-S600TT

Standard Grounding Kit (each)

Cold Shrink

Part Number: CS-60170T

Stock Code: CS-60170T

LMR-600 to -1700 Junction (each)

Cold Shrink

Part Number: CS-60120T

Stock Code: CS-60120T

LMR-600 to -1200 Junction (each)

Cold Shrink

Part Number: CS-A600T

Stock Code: CS-A600T

Cable to Antenna Junction (each)

Hoisting Grip

Part Number: HG-600T

Stock Code: HG-600T

Split/Laced Type (each)

Weather Seal Boots

Part Number: WSB-600

Stock Code: 3109-401

Weather seal/strain relief boots (10pk) for use with most popular LMR-600-X series connectors

Snap-In Hangers

Part Number: SH-U600T

Stock Code: SH-U600T

Snap-In Hangers (Kit of 10)

Crimp Tool

Part Number: CT-600

Stock Code: 3192-170

Crimp Tool for LMR-600 and TCOM-600 Connectors

Cutting Tool

Part Number: CCT-02

Stock Code: 3192-165

Cable end flush cut tool

Replacement Blade

Part Number: RB-02

Stock Code: 3192-166

Replacement blade for cutting tool

Replacement Blade Kit

Part Number: RB-CST

Stock Code: 3192-086

Replacement blade kit for all CST cutting tools

Cutting Tool

Part Number: CCT-03

Stock Code: 3192-267

The CCT-03 tool is an efficinet tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round.