LMR®- UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending/flexing cycles. It is used for both indoor and outdoor applications.
Coaxial Cable Attenuation
& Power Handling Calculator

LMR®-600-UF: View Data Sheet

Part Number LMR®-600-UF
Application Indoor/Outdoor
Jacket TPE
Jacket Color Black
Cable Od (in) 0.590
Cable Od (mm) 14.99
Weight lb/ft 0.165
Weight kg/m 0.25
Operating Temp (F) -40/+185
Operating Temp (C) -40/+85
Bending Moment ft/lb 1.750
Bending moment n-m 2.370
Impedance (Ohm) 50
Stock Check

Check stock online now:

Stock Check


For more Times Microwave Systems videos, visit our Videos page.

LMR Overview
LMR Overview

Installation Tools

The following Hardware and Installation tools are compatible with LMR®-600-UF

Crimp Tool

Part Number: CT-U

Stock Code: 3192-181

Crimp Handle (Dies Required)

Crimp Dies

Part Number: Y1720

Stock Code: 3190-203

".610"" Hex Dies"

Hanger Blocks

Part Number: CB-600T

Stock Code: CB-600T

Dual Cable Support Block (kit of 10)

Ground Kit

Part Number: GK-S600TT

Stock Code: GK-S600TT

Standard Grounding Kit (each)

Cold Shrink

Part Number: CS-60170T

Stock Code: CS-60170T

LMR-600 to -1700 Junction (each)

Cold Shrink

Part Number: CS-60120T

Stock Code: CS-60120T

LMR-600 to -1200 Junction (each)

Cold Shrink

Part Number: CS-A600T

Stock Code: CS-A600T

Cable to Antenna Junction (each)

Hoisting Grip

Part Number: HG-600T

Stock Code: HG-600T

Split/Laced Type (each)

Standard Entry Port Cushion

Part Number: SC-600T-3

Stock Code: SC-600T-3

Three Cables (each)

Crimp Tool

Part Number: CT-600

Stock Code: 3192-170

Crimp Tool for LMR-600 and TCOM-600 Connectors

Cutting Tool

Part Number: CCT-02

Stock Code: 3192-165

Cable end flush cut tool

Replacement Blade

Part Number: RB-02

Stock Code: 3192-166

Replacement blade for cutting tool

Replacement Blade Kit

Part Number: RB-CST

Stock Code: 3192-086

Replacement blade kit for all CST cutting tools

Cutting Tool

Part Number: CCT-03

Stock Code: 3192-267

The CCT-03 tool is an efficinet tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round.