EZ-400-716M-RA-X
Compatible With:
LMR®-400-PVC
LMR®-400-DB
LMR®-400-PVC-W
LMR®-400-FR
LMR®-400-FR-PVC
LMR®-400
LMR®-LW400
LMR®-LW400-DB
EZ-400-716M-RA-X
Part Number | EZ-400-716M-RA-X |
Interface | 7/16 DIN |
Gender | Male |
Orientation | Right Angle |
PIM Rating | N/A |
Stock Code | 3190-2545 |
VSWR Freq | <1.35:1 |
VSWR Freq GHz | 6 |
Coupling Nut | Hex |
Inner Contact Attach | Spring Finger |
Outer Contact Attach | Crimp |
Body Finish | Alballoy |
Pin Finish | Gold |
Length (in) | 1.6 |
Length (mm) | 41.7 |
Width (in) | 1.75 |
Width (mm) | 44.3 |
Weight (lb) | 0.374 |
Weight (g) | 0.17 |
Check stock online now:
Stock CheckInstallation Tools
The following Hardware and Installation tools are compatible with this connector's compatible cables.
Part Number: CT-U
Stock Code: 3192-181
Description:
Crimp Handle (Dies Required)
Part Number: CR-400
Stock Code: 3190-830
Description:
Crimp rings for TC/EZ-400 connectors (package of 10)
Part Number: CST-400
Stock Code: 3192-004
Description:
Combination prep tool for LMR-400 and TCOM-400 crimp and clamp style connectors
Part Number: TK-400EZ
Stock Code: 3190-1601
Description:
"Tool kit for LMR-400 crimp/clamp connectors (includes CCT-02, CST-400, CT-400/300, Tool Pouch)"
Part Number: ST-400C-2
Stock Code: 3190-1972
Description:
Prep tool for EZ-400-NMC-2 two piece clamp style connector
Part Number: Y1719
Stock Code: 3190-202
Description:
.429" Hex Dies
Part Number: GK-S400TT
Stock Code: GK-S400TT
Description:
Standard Grounding Kit (each)
Part Number: HG-400T
Stock Code: HG-400T
Description:
Laced Type (each)
Part Number: WSB-400
Stock Code: 3109-394
Description:
Weather seal strain relief boots (10 pk) for use with most popular LMR-400-X series connectors
Part Number: CCT-02
Stock Code: 3192-165
Description:
Cable end flush cut tool
Part Number: RB-02
Stock Code: 3192-166
Description:
Replacement blade for cutting tool
Part Number: RB-CST
Stock Code: 3192-086
Description:
Replacement blade kit for all CST cutting tools
Part Number: CCT-03
Stock Code: 3192-267
Description:
The CCT-03 tool is an efficinet tool for cutting LMR, TCOM and RG cables having a diameter of LMR-600 or smaller. This tool provides a clean, square cut - leaving the the cable cut perfectly round.